ASTM A490 Type 3 Heavy Hex Bolts Order

Z0065c — Mon, 05 Aug 2024 07:51:42 +0000

In July, Ms Sylvia from NHAN VIET ICS JSC in Vietnam were sourcing for the stud bolts and nuts:

Our price is very competitive , and reward the PO successfully. Meanwhile, we offer the FORM E and CO certification issued by the official goverment in order to reduce the custom clearance tax, our partner is very pleased with that.

ASTM A490 Type 3 Heavy Hex Bolts Specification

ASTM A490 bolts are heavy hex bolts made of alloy steel with a flat bearing surface, washer faced, and chamfered point. They are used in structural steel joints in heavy construction applications that require greater yield and tensile strengths than those of an A325 bolt are required. They are available in diameters ranging from ½” up to 1-1/2” and come in two types.

Type 1 bolts are made from alloy steel, and Type 3 is made from a weathering steel, which is approximately twice as resistant to corrosion as Type 1. These Type 3 A490 bolts shall be marked “A490” to set them apart from standard A490 bolts.

A490 Types

TYPE 1	Medium carbon and alloy steel.
TYPE 2	Withdrawn in 2002.
TYPE 3	Weathering steel.
M	Metric A490.

A490 ASTM A490 Type 3 Chemical Properties

Chemical Requirements for Type 3 Bolts
Element	Heat Analysis, %	Product Analysis, %
Carbon
Sizes 0.75 in. and smaller	0.20–0.53	0.19–0.55
Sizes larger than 0.75 in.	0.30–0.53	0.28–0.55
Manganese, min	0.40	0.37
Phosphorus, max	0.035	0.040
Sulfur, max	0.040	0.045
Copper	0.20–0.60	0.17–0.63
Chromium, min	0.45	0.42
Nickel, min	0.20	0.17
or
Molybdenum, min	0.15	0.14

A490 ASTM A490 Type 3 Mechanical Properties

Size	Tensile, ksi	Yield, ksi	Elong. %, min	RA %, min
1/2 – 1-1/2	150-173	130	14	40

Heavy Hex Bolts Tensile Properties

Tensile Load Requirements for Bolts Tested Full-Size
Bolt Size,Threads per Inch,and Series Designation	Stress Area,^Ain²	Tensile Load ^B lbf		Proof Load ^B	Allermative Proof Load,^B lbf
Bolt Size,Threads per Inch,and Series Designation	Stress Area,^Ain²	min	max	Length Measurement Method	Yield Strength Method
Column 1	Column 2	Column 3	Column4	0dumn 5	Column 6
1/2 -13 UNC	0.142	21300	24600	17050	18500
5/8 -11 UNC	0.226	33900	39100	27100	29400
3/4 -10 UNC	0.334	50100	57800	40100	43400
7/8 -9 UNC	0.462	69300	79950	55450	60100
1-8 UNC	0.606	90900	104850	72700	78800
1 1/8 -7 UNC	0.763	114450	132.000	91550	99200
11/4 -7 UNC	0.969	145350	167680	16.300	26000
13/8 -6 UNC	1.155	173250	199850	138600	150200
11/2 -6 UNC	1.405	210750	243100	168600	182600

^AThe stress area is calculated as follows:

A.=0.7854[D-(0.9743/n)]²

where:

A – stress area, in.²

B – nominal bolt size, and

C – threads per inch.

^B Loads tabulated and loads to be used for tests of full-size bolts larger than 1% in. in diameter are based on the following.

Inspecting ASTM A490 Type 3 Heavy Hex Bolts

Dimensional measurement:

Use measuring tools such as calipers and micrometers to check the dimensions of the bolts, including diameter, length, thread size, etc.

Ensure that the dimensions meet the relevant standards and design requirements.

Appearance inspection:

Visually inspect the surface of the bolts to check for defects such as cracks, scratches, rust, etc.

Check whether the threads are complete and the head shape is correct.

Heavy Hex Bolts Key Advantages

Enhanced Corrosion Resistance:

High Strength:

Suitability for Outdoor Environments:

Reduced Maintenance

Important Considerations:

While the weathering steel provides corrosion resistance, it’s essential to understand that it’s designed for specific environmental conditions. They are not suitable for all environments, particularly those with excessive chloride exposure (e.g., coastal areas with high salt content).

The selection of compatible washers and nuts is crucial for optimum performance.

It is very important to remember that certain coatings can cause hydrogen embitterment in high strength bolts, like A490 bolts, and are therefor prohibited.

In essence, ASTM A490 Type 3 bolts offer a combination of high strength and improved corrosion resistance, making them a reliable choice for demanding structural applications.

The post ASTM A490 Type 3 Heavy Hex Bolts Order appeared first on Supplier of Quality Forged Fittings-Flanges.

ASTM A490Heavy Hex Bolts – Supplier of Quality Forged Fittings-Flanges