A batch of SS304 DN300 buttweld elbow has passed final inspection. The DN300 buttweld elbow (Φ323.9×5.5) is ready for shipment to a long-term Singapore client. It will serve a core municipal engineering project. Every SS304 BW elbow was 100% PMI tested. Ni measured 8.15%. Cr measured 18.16%.
Strict Material Control: Spectrometer PMI on Every SS304 BW Elbow
- 100% PMI re-check on all SS304 DN300 buttweld elbow.
- Handheld alloy analyzer (spectrometer) used on elbow surfaces.
- Measured Ni: 8.15%. Measured Cr: 18.16%.
- Results fall within SS304 (1.4301) limits per EN 10253-4.
- High Cr and Ni content delivers strong oxidation and corrosion resistance.
- Suits buried and exposed municipal environments.
Download the full chemical composition report.
SS304 DN300 Buttweld Elbow Dimensions: Verified Before Packing
- Size: DN300, OD Φ323.9mm, wall thickness 5.5mm.
- Wall thickness: multi-point checks with vernier caliper. Uniform thickness within tolerance.
- OD and ID: tape and vernier caliper cross-checked. Data within EN10253-4 Type A tolerance.
- End face and angle: square ruler and feeler gauge for perpendicularity.
- Center-to-End measured by tape. 90° angle confirmed. Smooth arc transition reduces fluid resistance.
Mechanical Properties: Built for Municipal Pressure Demands
|
Steel Grade |
Steel Number | Hardness (HB) max. | Yield Strength Rp0.2 (MPa) min. | Tensile Strength Rm (MPa) |
Elongation A (%) min. |
|
X5CrNi18-10 |
1.4301 | 215 | 195 | 500 to 700 |
40 |
Contact us for a sample MTC (Mill Test Certificate).
EN10253-4 Manufacturing: Marking and Process Details
- Marking: Elbow 90° (3D) DN300 BW SMLS.
- Grade and standard: 1.4301 / SS304 EN10253-4 Type A.
- Size: Φ323.9×5.5. Traceability code: HT: YX2311-514.
- “(3D)” means long radius elbow. The standard choice for municipal projects.
- “BW SMLS” means seamless butt-weld elbow.
- Seamless process removes weld seams and leak risk.
- Type A bevel preparation improves field welding quality and NDT pass rate.
FAQ
Q1: Can you provide an MTC for the SS304 DN300 elbow?
A: Yes. Every batch ships with a Mill Test Certificate. It covers chemical composition and mechanical properties. SGS, BV and other third-party PMI re-checks are supported.
Q2: Is this SS 304 DN300 buttweld elbow seamless or welded?
A: It is marked “BW SMLS”. The elbow is pushed from seamless pipe. No weld seam means better performance under high pressure and against leakage.
Q3: Which standards do you produce to besides EN10253-4?
A: Our lines cover ASTM/ASME B16.9, GB/T 12459, JIS and other international standards.
Q4: How do you protect DN300 elbows during shipping?
A: Large-diameter fittings ship on fumigation-free wooden pallets or in custom crates. Plastic corner guards or wooden rings protect beveled ends against impact and sea-freight vibration.
Q5: Do you accept OEM or custom marking?
A: Yes. We support OEM/ODM. Standard marking covers size, material and heat number. Custom logo and packaging are available after drawing review by our engineering team.
Send your specifications and get a quote within 24 hours.
Latest News
- 18 11 月 2026SS304 DN300 90° Buttweld Elbow Delivered to SingaporeA batch of SS304 DN300 buttweld elbow has passed final […]...
- 11 11 月 2026SS316L Butt Weld Fittings OrderSS316L butt weld fittings to EN 10253-4 appear in most […]...
- 15 9 月 2026Oil Tank Sandblasting & Rust RemovalWhy Surface Preparation Is Critical for Oil Tank Anti-C […]...



